Lighting a fire can sometimes be difficult. Those of us who have arrived at a cold cabin in the winter, know that there are many different ways to get the fire going. However, this is a trusted procedure that makes lighting the fire easy. Also, this procedure is better for the environment.
The experts often talk about top down and bottom up lighting. You either start lighting from the top or from the bottom. We prefer top down . This method produces less soot and ashes, ensures better air supply and makes the first wood load last longer.
Anyway, in order to light the fire on the first try, you will need:
- A couple of larger logs of wood
- 8 to 12 pieces of kindling sticks
- Firelighters or newspaper
AIR AND LOGS OF WOOD
Ensure that all air vents in the fireplace are open. Put the logs on the bottom of the fireplace. It is important that the wood is cleft and dry. The logs may be as thick as a fist or thicker.
Add a layer of small logs of about 4 cm, and then one or two layers of kindling. Remember that air is important – approx. 1 cm between the pieces of wood is the perfect spacing.
Put a couple of fire firelighters on top of the layer of kindling wood or use some newspaper. Be aware that newspaper produces unnecessary amounts of ashes and contributes to more soot.
The last step is easy, just light it and close the door! Some chimneys take more time to create good draught than others. If the draught is insufficient, it might be an idea to open the door to the wood stove slightly until it is properly burning. If the house or cabin is “too” insulated, you might want to open a window. The same applies if the kitchen ventilator is on.